Showing posts with label How to. Show all posts
Showing posts with label How to. Show all posts

Tuesday, January 10, 2012

How to Set Up an alarm system for your home


Statistics alone are testimony to the fact that burglaries and intrusion attempts are significantly lower in homes that are protected with Alarm systems.Even the attempts which are made are more likely to be thwarted.

And unlike the past when Home security was considered to be exclusively made for the rich and famous, today they are cost effective and most homes rely on them.

So how can you set up a home alarm system? What all are the factors that you need to consider? Let’s take a quick look.

Thursday, January 5, 2012

How to setup a remote monitoring CCTV network



Now you can remotely monitor your CCTV cameras without making significant changes to the hardware or communication lines in the house.

There are a lot of benefits of opting to monitor the house remotely as opposed to manual surveillance. Remote monitoring allows you to keep a check on the house from virtually anywhere (Depending on the type of technology you have decided to use).

Also, with a recording device, you can always scan through the footage and it is accepted as proof in any court of law.

So how do you install a remote monitoring CCTV network? Let’s take a look.



Wednesday, April 20, 2011

How to Fullproof Your Existing CCTV System.

In Recent times, CCTV systems are getting more sophisticated but so is its vulnerability as the technology is becoming more and more commonly accepted. In this article we discuss various solutions- Specially designed DVR cabinets, Hidden Cameras, Intermediary recording devices, which can be installed to make existing CCTV solution more secured.

Friday, March 19, 2010

How to prevent False Alarms?


Nothing is more annoying than rushing from office to your home and finding out that the alarm alert that you just received is a False one! After all when it comes to your Home protection, you would want to take each alarm as seriously. I just read on www.mouthshut.com about security alarm reviews and was determine to gather few reasons for False alarm to share with Owners of existing alarm system and others who would like to invest in one.

Introduction: Security is not a compromise on convenience
Security alarm is meant to add the convenience of putting all your security worries at rest . A Reliable Security system is the one which ensures complete safety, low false alarm rate and quick response methods. Which make the opting of a good quality system even more important. READ FURTHER for common reasons of false alarms, features in an alarm system which ensures Low false alarm rates and our recommended security alarm for Indian Home and offices.

False alarms are generally caused by following reasons-
1) Installation is not proper-  There may be a short circuit and improper wiring done which may cause false alarms. Wires used should also be of good quality
2) Connection to the Sensors are loose- The loose connection at the control panel end or the device end can also result in a false alarm. The sensor, magnetic switches should also be of a good quality.
3) PIR sensor is not located properly- Many False alarm problem arise due to PIR Sensor location and environment in which it is Installed.
4) Fluctuating Electricity and improper Battery backup- Fluctuation in electricity can also cause false alarm. The system with battery backup should also have automatic charger, deep discharge protection and
5) Sensor Frequency conflicted by other equipments- Most of the wireless alarm system works on RF based frequency.  Some times this RF frequency is conflicted by other equipments and it gets a false alarm. For Example you have wireless door bell and wireless alarm. Its may get an alarm when someones presses the door bell.
6) Lack of operational Knowledge- The system owner should understand the proper functioning of the alarm and should also educate the other users. The system owner should periodically test the system and ensure that the system is serviced on time.

Features of Alarm system which ensures LOW FALSE ALARM RATE

1) Zone response time- Each zone should have respond time up to 300 Micro Sec.
2) Zone Bypass- All Zones can be bypass expect the Fire Zones and 24 Hr emergency zones

3) Battery Backup.
4) Battery Charging and Protection Unit.
5) System Test Button.

Recommended Security alarm for Indian environment and conditions-

Guard MC plus by Digitals India Security Products Pvt Ltd is an Wired/Wireless Integrated alarm system. Guard MC plus has advance alarm features like-
1) Programmable 8 Zones- Instant, Entry Delay, 24 Hour Instant, 24 Hour silent Panic
2) Four Arming options- Automatic real time, On board Keypad, Remote Switch, Mobile/Landline
3)periodic report through communicator to CMS.
4) Tamper proof cabinet and wiring.
5) Inbuilt digital communicator and Auto- dialer.
6) 12 V Battery backup with intelligent charging unit, deep-discharge protection.
7) Compatible with wire/wireless switches and sensors.
8) System Test facility
9) Smart sleek look panel with LCD display and onboard keypad.
10) Includes 2 remote for arming/disarming and optional external keypad.




Friday, February 26, 2010

How to secure Small- Medium Enterprises (S-ME)


Each year, small- medium enterprises lose lots of money to theft damages and fire, but this could be prevented with the installation of DIGITALS cost effective electronic security and surveillance systems.


We at DIGITALS understand the security needs of SME. We highly recommend following Security solutions for SME

SECURE YOUR PREMISES
From possible theft, break-in, forceful entry and Fire. Choose from our range of Security and Fire alarm panel, Sensors and Detector and Auto Diallers. You can also keep a check on Guards using our Guard Monitoring systems.
 
SECURE YOUR ENTRANCE/EXITS
Safeguard your entrances with Metal Detectors, Employ access control system to ensure that employees only access.

MONITOR YOUR OFFICES/MANUFACTURING UNIT/WAREHOUSES REMOTELY
Through CCTV systems have a complete control of important locations. Monitor your business from anywhere in the world.


PROVIDE AUTHORISED ACCESS TO RESTRICTED AREA
Restrict employee access to key areas like manager cabins, server rooms, warehouse, production unit.


IMPROVE STAFF EFFECIENCY
Create professional working environment with the aid of Time attendance and payroll software.


EFFECTIVE VISITOR MANAGEMENT
Record Visitor information, authorise visitor entry in a more effective way using our VISITOR MANAGEMENT SOFTWARE.


EMPLOY A RESPONSE METHOD
In case of a security breach or fire, the system should send auto response messages to concern personnels. You can opt for New Generation alarm system- Guard MC+ with CMS and autodialler facility.



SAFEGUARD YOUR ASSETS.
Protect your goods, equipments and machineries from theft, fire and damage with our complete range of fire alarm and security alarm system.


WHY CHOOSE US?


We follow three key strategies - BEST QUALITY, HONEST PRICING and FRIENDLY ADVICE


Customized and Cost effective solution
Get a complete security and surveillance solution under one roof. Our Security experts will suggest you the best tailor-made solution for your organization.

Peace of Mind
Rest assured of the quality, warranty and after sales service of your investment. DIGITALS has unmatched experience of 27 years in handling many prestigious project across India.

Friday, September 11, 2009

How to differentiate between genuine and fake notes.

Everybody knows the "Importance Of Money" in today's life. A lot of fake notes have come into market. Terrorists and criminals are manufacturing such notes very intelligently. Common man should know how to identify a fake note.Look at all your notes carefully before taking it from the ATM or receiving it from another person, even if he is a trusted person because fake notes are increasing. We are providing you the information so that next time you receive a note you can easily differentiate between a genuine note and a fake note.

1 In a fake note the security thread that passes through the note is tampered and is broken in between whereas in a genuine note the thread is visible in a straight line. It contains the words "Bharat" in the Devanagri script and "RBI" appearing alternately.

2 The number panel of the notes are printed in fluorescent ink and are of standard size (if a number mentioned on the top right hand corner of the note varies in size, then it is a forged note).

3 The `micro-lettering' technology used in the printing of a note provides additional security to the notes against counterfeiting. Micro-printing like "RBI 100" is printed that can be seen using magnifying glass.

4 Braille Mark -- An identification mark has been introduced in the new series note for visually impaired people. This mark is in intaglio printing and it has different geometrical shapes for various denomination. For Rs 100 denomination, we have triangle as the identification mark.

5 The image of Mahatma Gandhi on the left side of the currency note is printed exactly the same like the one printed on the right hand side of the note. When the note is put underneath a bulb or looked up in the natural light, the image of Mahatma Gandhi on the left side of the note becomes clearly visible.

6 When the currency note is placed under the Ultra violet lamp it one can see the image of twinkling stars.

7 The fluorescent ink used in the printing of the currency note is water and soap resistant and dries quickly on getting wet.

8 The printing of a currency note has distinct and vivid colours.

9 The watermark in new currency note depicts Mahatma Gandhi, visible from both front and back in transmitted light. Cannot be replicated using scanning or photocopy equipments.

10 The portrait of Mahatma Gandhi, Reserve Bank Seal, guarantee and promise clause, Ashoka pillar emblems on the left, RBI governor`s signature are printed in intaglio, that is in raised prints. (IMP)

11 I, J, O, X, Y, Z alphabets are not used in alphabet series on any note.
12 In 2005 series, on the reverse side of the notes, the year of printing is mentioned at the centre bottom.

LATENT IMAGE : There is a vertical band on the right side of Mahatma Gandhi's portrait which contains the image of the notes denomination. The image appears only when light is allowed to fall at an angle of 45 degrees on the note, otherwise it appears as a vertical band.

MICROLETTERINGS: This appears between the vertical band and the portrait. It can only be seen better through a magnifying glass. For Rs 10 notes, it contains the word "RBI". Notes of Rs 20 and above contain the denomination value of the note.

IDENTIFICATION MARK: On all notes except Rs 10, there is a special intaglio feature on the left of the water-mark specially for the visually impaired. This feature varies according to the denomination of the note. They are: Rs 20: Vertical Rectangle, Rs 50: Square, Rs 100: Triangle, Rs 500: Circle, Rs 1000: Diamond.

INTAGLIO PRINTING: In notes of Rs 20 and above, the Gandhi portrait, RBI Seal, guarantee, promise clause, Ashoka Pillar emblem, and the governor's signature are printed in intaglio or raised print.

FLUORESCENCE: The number panels are printed in fluorescent ink. The notes have also optical fibres which can only be seen when exposed to a ultra-violet lamp.

OPTICALLY VARIABLE INK: The numerals of the Rs 500 (revised colour scheme of milk yellow, mauve and brown) and Rs 1000 notes is printed in optically variable ink (a colour shifting ink). The colour of the numerals on the note is green when held flat but will turn blue when the note is held at an angle.

Our sorce of information is TIMES OF INDIA

If you want to check whether all the notes that you possess are genuine or a fake one then you may click on this link UV fake note detector

Tuesday, August 19, 2008

How to insure 'On campus security' for SMB/SME (small/mid-sized business firm)

Larger businesses have more resources to guard their premises, Making Small businesses more vulnerable to intrusion and robbery. Therefore, Small businesses should plan and execute there security measures properly. The Security concerns for small businesses would depend on kind of business they are engaged in. A software development firm may want to guard their important data even from its employees. A SM Company might want to guard their valuable commodities like jewelery from theft. Some would want to monitor their godowns and storage. Production and manufacturing unit may want to screen Personals for a possible theft of raw materials etc.
The advancement in the technology have evolved over the years by understanding the needs and threats for organizations. A business owner (out of ignorance or cutting expenses) should not compromise on Security of their organizations. In a broader picture, a properly implemented security system will reduce cost of man guarding and prevent losses by raw material theft, robberies, secret leak etc.
These are the prime areas of implementing a security system-
1) Premises- You may need fencing, site surveillance CCTV, patrolling guards, etc.
2) Entrances and exits- You may need to monitoring exits or entrances with CCTV. Install metal detectors or door alarms.
3) Authorized Entry- An access control system for employees according to hierarchy levels. Issuing of access control cards will also help in attendance at main entrances.
4) screening- at production units, where the employees handle raw material.
5) Response method- installing security or fire alarms, emergency security dialer which can automatically call and inform 10 telephones numbers when the alarm is triggered.

For a more comprehensive need and detailing of a customized system for your company. Contact
di.smv@digitalsindia.com

Saturday, February 9, 2008

How to use a Hand held Metal detector

Operating a metal detector is simple. Once you turn the unit on, you move slowly over the area you wish to search. In most cases, you sweep the coil (search head) back and forth over the ground in front of you. When you pass it over a target object, an audible signal occurs. More advanced metal detectors provide displays that pinpoint the type of metal it has detected and how deep in the ground the target object is located.

Wednesday, September 12, 2007

How to make your home safer?

Posh areas of Delhi are considerably under spotlight. This time because of a increase in house robberies. According to Indian express article-

``There are three kinds of areas that are prone to robberies in Delhi,'' an officer at the Lajpat Nagar Police Station told Express Newsline. ``Places like Neeti Bagh and Gulmohar Park in South Delhi where the well-off live; places that are well-connected to the Ring Road as it is easy for the robbers to get away with the loot; And finally, places that are not well-lit.''

Commenting on the situation in northwest Delhi, DCP (north-west) Satyendra Garg says: ``It is a border district and therefore more prone to robberies. Investigations have revealed that most of these robberies have been committed either by novices or by gangs based in Haryana. Many of the robbers are dhobis or drivers: They are not starving, but think they will make a quick buck by robbing people.''

Statistics available at PHQ reveal that robberies have been the largest contributor to the 12 per cent increase in crime since the beginning of this year as compared to the whole of last year: 364 cases of robbery were reported till June 30.

While 46 cases were registered in June, at least 31 were registered during this months till yesterday.

Question to deal with is - IS YOUR HOME SAFE?
The more important aspect is to educate oneself of the right security systems for your home. A security system has following components-


The input devices ( which trigger the alarm)
The output devices( which communicate the alarm like speakers)
The Control panel( networks between the devices and is a interaface for user)

The following weeks we will discuss the functioning of these devices and factors one should consider while choosing an alarm system

Tuesday, August 14, 2007

How to ensure home security?

Home security is as important as home itself. There are three steps of security- prevention, detection and post investigation in case of unfortunate event.
It would not be contradicted if we agree that the foremost importance is the step one: prevention.Following measures can help us prevent such events

Physical and electronic barriers must be introduced.
Physical barriers - Deter and slow the entry of criminals into a restricted area.
Outside chain link fences.
Exceptionally strong doors.
Quality mechanical locks.
Appropriate inside and outside lights.
Audio video door entry systems- to restrict entry

source: www.digitalsindia.com

LinkWithin

Related Posts Plugin for WordPress, Blogger...